Published at Thursday, April 14th 2016, 13:44:09 PM by Sarah Lim. Exterior Ideas. The first step, specify the size and cut timber in accordance with official regulations cornhole where we will need plywood by 24 by 48 inches. For that, use a circular saw to cut the boards right in the middle. Do not forget also to apply the trim on the 2 by 4 inch boards, cut into 4 pieces of wood with a length of 4 feet, cut into 4 pieces of wood with a length of 21 inches, cut into 4 pieces with a length of 11-5 / 8 inches.The second step, collect 2 by 4 inch boards and create a rectangle by using two pieces of wood measuring 4 feet and 2 pieces of wood measuring 21 inches, and make sure that the length of the frame must be 4 meters. Make two items are identical then put plywood on top of the frame. Use at least 10 wood screws per board to glue the boards in place. The third step to answer the question of how to build a cornhole set, we will perform the installation of the foot which is an important stage because the foot will be in the hinge so it must be adjusted in order to generate greater portability. For that, take 2 of 11-5 / 8 inches, 2 by 4 inch boards, and apply a 2 inch screw hinge on its side so that the top of the hinge is flush with the top of the board. After that, put the top of the 2 by 4 inch board on the top of the frame against the board with the hinge part facing down, and screw the hinges to the plywood.The fourth step is to answer the question how to build a cornhole set is to measure and cut a hole. Use a tape measure and mark 9 inches from the top of the board. Measure and mark 12 inches back from the side of the board. When two signs meet, this is what will be the center of the circle. Use holes saw and cut a circle with a diameter of 6 inches, based on the sign that we created earlier.The fifth step, apply sand and finish on the board. Puree the board using sandpaper and then apply the color in accordance with what we want to use a latex paint that had been prepared beforehand. Use at least two layers of paint. If we want to get a view of cornhole in accordance with official regulations, then we simply paint it with white paint, and voila ... the question how to build a cornhole set answered.
Published at Thursday, April 14th 2016, 14:00:59 PM by Miria Carney. Exterior Ideas. If you have questions about how to build a cornhole boards, then we can answer that question by doing the work itself. It is a fairly simple DIY job and will make us have a lot of fun, especially when doing it with friends or family. Each board will turn into a box with a slightly sloping top with a hole in the middle. The hole is large enough so that the beanbag that falls in it can fit snugly. This fun game will certainly add fun.
Published at Thursday, April 14th 2016, 14:17:35 PM by Miria Carney. Exterior Ideas. For a pergola with a rectangular shape, then wake up the basic shape using stakes to simplify. Make sure the line that we set is a straight line so that everything will be in the correct order. We also need to create a solid base so that it can support a large amount of weight that will be obtained later pergola. Make 2-4 inch hole for the posts.Create a concrete mix by following the instructions printed on the cement bag and place it in the base tubes. Make sure the height of the tube should be 3 inches below. Place the post anchors in the cement mixture before the mixture hardens. Install the posts to anchor and stabilize with the help of strapping, then place the headers evenly.Mark a line around wooden posts where we will cut. Measure the header in accordance with the design and carefully do the division. Apply varnish or paint before we start putting the parts together in order to ensure pergola all parts perfectly covered with paint.When selecting stocks perform the checks and make sure everything is perfect. After that, use a 3-4-5 triangle to check stock levels - whether they are present in the same height level or not. Do the painting on all parts and then connect the wooden posts on its support. Tighten the bolts in the area of the headers and the posts. Shape corner blocks to the required size where the header and posts intersect and install on any support by using screws.Place the cross members at the top of the header. Attach each header on the big board. When we use the central board for stability then connect it to the big board as well, and we already answer the question on how to build a pergola.
Published at Sunday, May 08th 2016, 16:11:38 PM by Miria Carney. Bathroom Remodel. Travertine flooring is one of the types of tiles are derived from limestone which is present in several colors ranging from brown, yellow, to shades of pink color that will greatly depend on the location of the quarry we do. Over time, the charm of the floor using travertine tile will lose luster and maybe there will be some tiles are dull, worn, and stained. To be able to restore the charm of travertine tiles, then we can choose to apply refinishing. There are a number of steps that we need to go through to get the look of the floor again issued a distinctive charm of travertine tiles, and the following is the list below.
Published at Sunday, May 08th 2016, 15:49:00 PM by Miria Carney. Home goods. Here are some things we must consider when deciding to get a travertine backsplash in the kitchen or other room. First, make sure to put a backsplash in an easily accessible position in order to make us easy in cleaning. There would be nice of course if we install a backsplash in hard to reach places so that the cleaning and maintenance backsplash will be hampered by it. For that, think with good design and proper position for kitchen backsplash that we will apply to the use of travertine as the main character. Second, do the settings in the area where we are working to prepare the food. It is still related to the previous statement in which to choose a backsplash in a position where we spend most of the time when cooking will allow us to perform maintenance and cleaning. In addition to some of the above, also be sure to always clean travertine backsplash periodically so that the zoom will always be clean and fascinating. Anyway, make sure not to wait for the dirt to accumulate in the long run that will only make us spend more time and energy.
Published at Sunday, May 08th 2016, 13:58:33 PM by Miria Carney. Exterior Ideas. Torch down roofing or also known as rubberized asphalt roofing is one of a kind commonly used especially on flat roofs where the asphalt will be merged into the roof using a torch in order to create an impermeable roof capable of providing durability up to a dozen or decades ahead. As said, this is the right type of roofing is applied to the flat roof as it will provide maximum protection from rain water which is offered at a cost that is lower when compared to using traditional roofing tar or gravel are also often applied to the flat roof. Yeah, in other words it can be said that the rubberized asphalt is one type of roof that will give slightly better results when applied than other roof types.
Published at Sunday, May 08th 2016, 09:05:03 AM by Miria Carney. Bathroom Remodel. If we want to restore the charm of a bathtub that has been worn and may be damaged or cracked in several places, then we can choose to replace it with a new or decided to do a tub reglazing. The latter option is one option that will make us save more money when compared to replacing a bathtub with a new one. As we know, the price for the bathtub is not cheap where we must spend at least thousands of dollars or more in accordance with the specifications that we want. By doing reglaze, then we can bring new and fresh look at the bathroom to use the old tub. Basically reglazing process will require several stages depending on the material we have bathtubs.
Published at Sunday, May 08th 2016, 08:40:38 AM by Miria Carney. Bathroom Remodel. However, if we do not have enough ability and confidence are great for doing tub refinishing by our own, so it is better for us to rely on professionals such needs. Choose and get an experienced contractor to do the repairs on the tub through the recommendation of friends or get information through other sources. Although it looks easy, but if we want to do for the first time, then it will need the help of professionals. Observe how they work, ask some questions, and if in the future we are experiencing the same problem, then we can easily do it by ourselves.
Published at Sunday, May 08th 2016, 08:22:11 AM by Miria Carney. Exterior Ideas. Before we discuss about Trex decking cost, then it's good to know about TREX decking products first. To note, TREX is one of the largest recycling company in the United States were the product of his deck consists of 95% recycled products with various types of materials that are inside from sawdust, plastic, and wood reclaimed. By using TREX decking, then we do not need to worry about the impact it will have on the environment because the material is made from recycled material so environmentally friendly that is different from other materials that are used as timber decking as a percentage of the components is much higher. Although made from reclaimed wood, but the deck does not require the level of care as well as most wood decks.
Published at Sunday, May 08th 2016, 07:50:28 AM by Miria Carney. Exterior Ideas. To continue travertine pavers project we do, then the next step we need to do after a series of preparatory above is applying edging with poured concrete shallow along the outer perimeter after we finished setting the travertine tile. After applying edging, then we'll go to the next stage of applying the finish on travertine tile. There are several choices of finish that we can get to maximize functionality and look of travertine pavers from the start of the tumbled finish that is the finish that will produce natural looking on the paver with texture, porous surface that has great traction and skid resistant. In addition, we can also get honed travertine as one other finish options are very suitable to be applied on the outdoor project that will produce a finer finish appearance when compared with tumbled, and also has a large enough traction even when wet paver conditions. Finish the third is polished travertine surface that has the look smooth, shiny, and will make travertine pavers has charming look.
Product On Sale
More discount available
Urips in your email
Sign up for free
When we talk about the baluster, then we will talk about a row of small posts that suppor..
If you really want to do decluttering, all I can say it that there are many ways to do that. Th..